OpenVox 1 Port D130 PRI Card

Model: D130
SKU: AVY1062
In Stock
Rs.23,777.00
In Stock
Add to Wishlist
Add to Wishlist
SKU: AVY1062 Category: Brand:

Description

Specifications

OpenVox D130 Series is now the leading single port T1/E1/J1 PCI-E card in the open-source industry. It supports up to 32 channels in E1 mode or 24 channels in T1/J1 modes. It takes full advantage of the Octasic® Hardware Echo Cancellation Module to deliver superior voice quality over the T1, E1, and J1 interface.

The D130 Series is an upgrade product of the D115 Series. It’s supposed to be the most advanced single port T1/E1/J1 asterisk® card with superior quality in the open-source community. It supports T1, E1, and J1 environments and is selectable on a per-card or per-port basis. The leading innovation ensures users to adjust the interrupt frequency to reduce the CPU load up to 70% and adjust the interrupt number to avoid interrupt number sharing or conflict.

DE130 Series offers an onboard Octasic® DSP-based echo cancellation module. The Octasic® DSP-based EC module enables users to eliminate echo tails up to 128ms or 1024 taps across all 32 channels in E1 mode or 24 channels in T1/J1 modes. Further, this module takes advantage of the Octasic® Voice Quality Enhancement to provide superior sound quality on all calls.

D130 Series supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported.

D130 Series works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.

Target Applications

  • Voice-over Internet Protocol (VoIP) Services
  • Complex IVR Trees
  • “Meet-Me” Bridge Conferencing
  • Calling Card Platforms
  • VoIP Gateways (support SIP, H.323, and IAX)
  • Legacy PBX/IVR Services
  • Voice/Data Router (replace expensive routers)
  • PRI/Switch Compatibility – Network or CPE

Optional Octasic® DSP Echo Cancellation Module–EC2032

  • 128ms tail/channel (on all channel densities)
  • Octasic®  Music Protection
  • Adaptive Noise Reduction
  • Automatic Level Control (G.169)
  • Field upgradeable algorithm
  • V.25 / V.8 answer tone (w/ and w/o phase reversal)
  • DTMF as per Q.24
  • No CPU load as a result of echo cancellation.
  • Does not increase the physical size of the card, and no additional slot is required
  • EC2032 power consumption: 3.83W
  • Storage temperature: -40°C to 75°C

1 T1/E1/J1 ports;

Up to 32 channels in E1 mode or 24 channels in T1/J1 modes;

Support protocols PRI, SS7, R2;

Lifetime warranty!

Reviews

There are no reviews yet.

Be the first to review “OpenVox 1 Port D130 PRI Card”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsOpenVox 1 Port D130 PRI Card removeAllo 2 Port PRI Card With Echo Cancellation removeAllo 8 Port PRI Card With Echo Cancellation removeSangoma 2 Port T1/E1/J1 PCIe Card Without Echo Cancellation removeSangoma 4 Port T1/E1/J1 PCIe Card Without Echo Cancellation removeAllo 2 Port PRI Card Without Echo Cancellation remove
NameOpenVox 1 Port D130 PRI Card removeAllo 2 Port PRI Card With Echo Cancellation removeAllo 8 Port PRI Card With Echo Cancellation removeSangoma 2 Port T1/E1/J1 PCIe Card Without Echo Cancellation removeSangoma 4 Port T1/E1/J1 PCIe Card Without Echo Cancellation removeAllo 2 Port PRI Card Without Echo Cancellation remove
Image
SKUAVY1062AVY1054AVY1044AVY1050AVY1051AVY1059
Rating
PriceRs.23,777.00 Rs.59,000.00 Rs.120,900.00 Rs.36,000.00 Rs.62,400.00 Rs.27,840.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Specifications

OpenVox D130 Series is now the leading single port T1/E1/J1 PCI-E card in the open-source industry. It supports up to 32 channels in E1 mode or 24 channels in T1/J1 modes. It takes full advantage of the Octasic® Hardware Echo Cancellation Module to deliver superior voice quality over the T1, E1, and J1 interface. The D130 Series is an upgrade product of the D115 Series. It’s supposed to be the most advanced single port T1/E1/J1 asterisk® card with superior quality in the open-source community. It supports T1, E1, and J1 environments and is selectable on a per-card or per-port basis. The leading innovation ensures users to adjust the interrupt frequency to reduce the CPU load up to 70% and adjust the interrupt number to avoid interrupt number sharing or conflict. DE130 Series offers an onboard Octasic® DSP-based echo cancellation module. The Octasic® DSP-based EC module enables users to eliminate echo tails up to 128ms or 1024 taps across all 32 channels in E1 mode or 24 channels in T1/J1 modes. Further, this module takes advantage of the Octasic® Voice Quality Enhancement to provide superior sound quality on all calls. D130 Series supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported. D130 Series works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.
Target Applications
  • Voice-over Internet Protocol (VoIP) Services
  • Complex IVR Trees
  • "Meet-Me" Bridge Conferencing
  • Calling Card Platforms
  • VoIP Gateways (support SIP, H.323, and IAX)
  • Legacy PBX/IVR Services
  • Voice/Data Router (replace expensive routers)
  • PRI/Switch Compatibility - Network or CPE
Optional Octasic® DSP Echo Cancellation Module--EC2032
  • 128ms tail/channel (on all channel densities)
  • Octasic®  Music Protection
  • Adaptive Noise Reduction
  • Automatic Level Control (G.169)
  • Field upgradeable algorithm
  • V.25 / V.8 answer tone (w/ and w/o phase reversal)
  • DTMF as per Q.24
  • No CPU load as a result of echo cancellation.
  • Does not increase the physical size of the card, and no additional slot is required
  • EC2032 power consumption: 3.83W
  • Storage temperature: -40°C to 75°C
  • SS7 Signaling supported
  • 1, 2, 4, 8 E1/T1/J1 ports with PCI-Express interface for high performance voice applications
  • Fully PCIe Gen1.1 (x1) compliant
  • Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU
  • Optional OctasicTM DSP Echo Cancellation Module 128ms tail/channel (on all channel densities)
  • PRI Switch Compatibility: Euro ISDN, Network or CPE, AT&T 4ESS, CAS Voice Modes
  • Interoperable with AsteriskTM, FreeswitchTM, YATETM, ElastixTM, TrixboxTM, FreePBXTM …
 Note: Actual Products may Different In Appearance/Colour to the Images Shown
  • SS7 Signaling supported
  • 1, 2, 4, 8 E1/T1/J1 ports with PCI-Express interface for high performance voice applications
  • Fully PCIe Gen1.1 (x1) compliant
  • Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU
  • Optional OctasicTM DSP Echo Cancellation Module 128ms tail/channel (on all channel densities)
  • PRI Switch Compatibility: Euro ISDN, Network or CPE, AT&T 4ESS, CAS Voice Modes
  • Interoperable with AsteriskTM, FreeswitchTM, YATETM, ElastixTM, TrixboxTM, FreePBXTM …
Note : Actual Products may Different In Appearance/Colour to the Images Shown
The Sangoma A102 card: Two spans of optimized voice and data over T1, E1, and J1 available with Telco-grade hardware echo cancellation. Actual Product might not be replica of the image shown due to regular CTI updates. Note : Actual Products may Different In Appearance/Colour to the Images ShownSangoma A104DE T1/E1 Card Ports: Four T1/E1 Without Echo Cancellation Interface: PCIe Express. Note: Actual Products may Different In Appearance/Colour to the Images ShownAffordable and easy to install, our E1/T1 PRI card can be bought with up to 4 ports and supports up to 30 voice calls per span, full-duplex data throughput. We use the same chipset as the bigger, more expensive brands and still deliver the same voice quality. Add the 128ms Hardware based Echo Cancellation Module and reach the highest standard in voice quality on the market. Use this card with the major Open Source platforms and create your own powerful PBX while keeping cost to a minimum. Note : Actual Products may Different In Appearance/Colour to the Images Shown
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare